1. Surface Preparation: Ensure that the surface where the backlit film will be installed is clean, smooth, and free of any dust or debris.
Trim the Film: Trim the backlit film to the desired size, leaving a slight overlap around the edges for a secure fit.
2. Apply Adhesive: Depending on the type of backlit film and the installation surface, apply a suitable adhesive to the back of the film or directly onto the surface.
3. Smooth Air Bubbles: Carefully smooth any air bubbles or wrinkles using a squeegee or similar tool, starting from the center and working towards the edges.
4. Trim Extra Material: Trim any excess material from the edges using a sharp utility knife or scissors for a clean finish.
5.Illuminate: Once the backlit film is securely installed, illuminate it from behind using LED lights or other suitable light sources to bring the graphics to life.
By following these steps, you can achieve a perfect and professional-looking installation that maximizes the impact of the backlit film.
For more details and information, welcome to send requirement to sales@paiouscreenmesh.com, or you can reach us at Tel/Whatsapp/Wechat: +86 19932893768
